RealtekPON chip model
Chip model | Maximum number of LAN ports | - | WIFI | Voice | Whether DDR is built-in |
RTL9601B | 1 | Single-port GPON and single-port EPON adaptive | Not supported | Not supported | yes |
RTL9601D | 1 | Single-port GPON and single-port EPON adaptive | Not supported | Not supported | yes |
RTL9602 | 4 | Four ports (1GE+3FE or 4FE) | Not supported | support | no |
RTL9602C | 2 | Single port with WIFI and two ports (1GE+1FE) with WIFI | support | support | yes |
RTL9603 | 4 | Four ports with WIFI (1GE+3FE or 4FE) | support | support | no |
RTL9603C | 4 | Four ports with WIFI (1GE+3FE or 4FE) Built-in DDR | support | support | yes |
RTL9606 | 4 | 4GE | Not supported | support | no |
RTL9607 | 4 | Quad port with WIFI (4GE) | Supports dual band | support | no |
RTL9607C | 4 | Quad port with WIFI (4GE) | Supports dual band | support | yes |
RTL9601CI | ONU STICK (SFP ONU) dedicated chip | yes |
Rafael digital CATV chip - RT990
Product Brief—RT990
Introduction to the RT990 chip
CATV adopts macro micro (RAFAEL) RT990 chip, built-in amplifier, can achieve the effect of traditional optical machine four-stage amplification, AGC range -15~-5dBm, received optical power range in -18~-2dBm, digital chip devices are few, small area, flexible layout, traditional analog CATV coil needs to be debugged, for factory production minus the debugging coil link, saving worker resources.
General Description
The RT990high-linearity analog RFtransimpedance amplifier (TIA) is intended for C-FTTH receiver. Extra operationamplifiers for power sensing and AGC control are needless due to DC amplifierand I2C_AGC control skill are built in RT990. The RT990provides 34dB dynamicgain control range for 17dB dynamic optical power range. The RT990can achievebest linearity and low noise figure with lowest power consumption by Rafael’spower saving sill. The RT990achieves both high performance and the lowest powerconsumption which perfectly compliant with the worldwide trend.
Features
40-1000MHzoperating frequency range
Highlinearity, 59dBc CSO/CTB (79ch)
Highdynamic gain range, 34dB gain adjust. Support 17dB optical power range.
Build-inDC amplifier for optical power sensing
Singlesupply, +4V ~ +5V
Lowpower consumption, 120mA for one RF output at 4.5V supply voltage
4×424-pin QFN
StandardI2C control interface
RT990 RF parameter index test
RT990 RF parameter index test |
serial number | project | unit | Test results | remark |
1 | RF parameters | Operating wavelength | nm | 1310、1550 |
|
2 | Input optical power range | dBm | -18～-2 |
|
3 | Light-controlled AGC | dBm | -15～-5 |
|
4 | Maximum output level | dBuV | 76.0 | -15dBm optical power reception, analog level |
5 | Frequency range | MHz | 47～1000 |
|
6 | Flatness | dB | ±1.5 |
|
7 | CN | dB | 45 | -15dBm optical power reception, AGC status, 59 PAL-D analog TV channel signals in the frequency range of 47MHz~550MHz |
8 | CTB | dB | 61.2 |
9 | CSO | dB | 60 |
10 | RF output impedance | Ω | √ |
|
11 | RF reflection loss | dB | 14.6 |
|